Falcon RJ-8000, Руководство пользователя, Страница: 45 / 190

RJ-8000 OPERATION MANUAL 3 Basic Installation
3-3
NOTE
When the control panel is in the following condition, the power is ON.
Press the key again to turn the power OFF.
•
The power lamp is lit (red).
2. Plug the power cable to the AC inlet on the back of the printer.
3. Plug the cable to the outlet correctly.
WARNING
•
Do not attempt to plug in electrical plugs with wet hands. Doing so may result in
electrical shock.
•
Be sure to use the specified voltage (AC 100V-120V/220V-240V). Otherwise,
electrical shock or fire may occur.
•
Use electricity directly form a power outlet (AC 100V-120V/220V-240V). Do not put
many loads on one electrical output. Otherwise, heat may be generated and cause
fire.
•
Be sure to use an outlet with an earth terminal, and use the terminal correctly.
Otherwise, electrical shock or fire may occur.
•
Do not connect earth cables in the following areas.
•
Gas pipes
Doing so may cause fire or an explosion.
•
Earth terminals for telephone lines or lightening rods
Doing so may cause a large flow of voltage if lightening occurs.
•
Water pipes or faucets
If there is a plastic part in the pipe, the earth will not work correctly.
No. Name
1 AC inlet
2 Power cable
1
2