Falcon RJ-8000, Руководство пользователя, Страница: 61 / 190

RJ-8000 OPERATION MANUAL 3 Basic Installation
3-19
8. While holding down the end of the media, hold the scroller and roll out a bit of the media. Remove
slack and skewness, then align the right edge of the roll media parallel with the media loading
position.
NOTE
•
The media loading position is a guide for setting up the media.
•
If the right edge of the roll media is 5 mm or more from the media setting position side to side, a media set error may
result if the media is not detected.
Make sure to set the right edge of the roll media within 5 mm of the media setting position.
•
If it is not possible to set the right edge of the roll media within 5 mm of the media setting position, refer to the figure
below and set the scroller position.
•
If the right edge of roll media is not in line with the Media loading position,adjust the scroller position as shown below.
No. Name
1 Insertion slot
2 Roll media
No. Name
1 Scroller
2 Media loading position
1
2
1
2
5mm