Falcon RJ-8000, Руководство пользователя, Страница: 21 / 190

RJ-8000 OPERATION MANUAL 1 Safety Instructions
1-3
Be sure to use an outlet with an earth terminal and use the terminal corectly. Otherwise,
electrical shock or fire may occur.
Follow the instructions below when handling the power cable.
•
Do not modify the cable
•
Do not put heavy objects on the cable
•
Do not bend, twist, or pull the cord
•
Do not wire the cable near equipment that generates heat
Follow the instructions below when handling the power plug. Otherwise, fire may occur.
•
Wipe away dust and any other residue before inserting the plug.
•
Ensure that the plug is firmly inserted as far as it will go.
When handling the foot switch, be wary of the following:
•
Do not place anything heavy on the foot switch.
•
Do not bend the cable of the foot switch with force, and do not pull.
•
Do not place the foot switch near thermal devices.
When handling ink cartridges, be careful that ink does not get in your eyes or on your skin.
However, if this happens, flush the are immediately with water. Otherwise, your eyes may
become congested or inflamed slightly. If you feel discomfort, consult a doctor immediately.
Do not disassemble ink cartridges. Otherwise, ink may get in your eyes or on your skin.
Be careful not to pinch your fingers when opening and closing the cover of the ink
compartment.
Be careful not to pinch your fingers when opening and closing the front cover.
When cutting the roll media, be careful of the following. Incorrect handling can result in injury
to the hands and fingers from the razor blade.
•
When holding the media, do not place fingers over the media cut groove.
•
Move the razor blade slowly along the media cut groove.
Do not use thinner, Benzene, alcohol or other active agents. Doing so may result in damage or
paint peeling from the casing.
Be careful not to spill water inside the printer. Doing so may result in a short circuit.
Never open the covers fixed with screws. Doing so may result in electrical shock or a
malfunction in the printer.
Do not touch the cutter blade. Doing so may result in bodily injury.
CAUTION