____________________________________________________________________________
- 27 -
Figure 3-12 Recall Interface
3.10.3 Shortcut Recall
To recall the saved V/I parameters, there is furthermore a shortcut recall function (On the condition that
“Shortcut” menu item is enabled).
1. Press
to enter into menu set interface;
2.
Select “System” sub menu under “Set”, press
to pop up system parameter set interface;
3.
Select “Shortcut” item to set as “ON”, to enable shortcut recall function;
4.
Press
to return to MAIN PAGE;
5. In CV/CC output mode, output is “OFF”, when parameter is not in edit state, simply press number key
to shortcut
recall the corresponding saved parameter (
corresponds to location 10).
3.11 Power Save & Power On Auto Output
FTP3000 series provides power save function, this feature determines the initializing parameters when power
supply is powered on, there are two choices:
●
On, use the parameter setting in last power-off;
●
Off, use the system default parameter
1. Press
to enter menu set interface;
2.
Select “System” sub menu under “Set”, press
to enter into system parameter set page;
