FTP3000 Series Programmable DC Power Supply Operation Manual
____________________________________________________________________________
- 20 -
Setting voltage and current upper & lower limit
The power supply provides a function for limiting the setting range of static output voltage and current.
When the
upper and lower limit is set to non-zero, the allowed setting range of static output voltage, current is limited
between the upper and lower limit. It is useful for preventing misoperation from damaging the user's DUT.
The limit function will be canceled if upper and lower limit both are set to 0.
1. Press
to enter into main menu interface;
2. Select “Output” sub menu under “Set” menu, press
to enter into output set interface as following:
Figure 3-2 Upper & Lower Limit for V/I Setting
3. Select “V_MAX”, “V_MIN”, “I_MAX”, “I_MIN” to set the voltage/current upper and lower limits.
3.4 Voltage Slew Rate & Current Slew Rate
FTP3000 series DC power supply supports adjustable voltage slew rate and current slew rate.
1. Press
to enter into main menu set interface;
2.
Select “Output” sub menu under “Set”, press
to enter into output set interface as following:
Figure 3-3 Set Voltage/Current Slew Rate
3. Select “V_SLEW” and “I_SLEW” for setting the desired value.
