Chapter 3 - page 30
MC work mode
3.9.1
DATA DEFINITION
Coordinates of the machining point
These coordinates are defined one by one. After placing the cursor over the axis coordinates, one can:
a) Enter the value by hand. Key in the desired value and press
b) Assign the current axis position.
Jog the axis to the desired point with the handwheel or the JOG keys. The upper right-hand window
shows the tool position at all times.
Press
for the selected data to assume the value appearing in the upper right-hand window.
Press
Machining conditions in Z (Zs, Z, P, t)
The machining conditions are defined one by one.
The Zs and Z values are defined like those of the machining point.
To define the rest of the values (P, t), place the cursor in the corresponding window, key in the desired
value and press
Type of exit at level 1
The exit movement may be carried out in two ways:
At machining feedrate (G01) and with the spindle turning
In rapid (G00) and with the spindle stopped
To select the type of exit, place the cursor over this icon and press
Data for orienting and retracting the quill (
α
α
s,
∆
∆
x,
∆
∆
y)
They are defined one by one.
Go to the relevant window, key in the desired value and press
The quill first orients, it then retracts in XY and finally goes up
in rapid (G00) with the spindle stopped.
3.
Work with operations or cycles
3.9
Boring operation
Содержание 8040 MC CNC
