Fagor 8040 MC CNC, Руководство пользователя

Страница: 94 / 247

Chapter 3 - page 10
MC work mode
3.3.2 PROFILE DEFINITION (LEVEL 2)
To define the "Profile program" one can:
Key in the "Profile Program" number directly.
If the "Profile program" number is known, key it in and press
Access the "Profile Program" directory to select one of them
Press The cycle will show a window with the profile programs already defined.
To move around within a window, use
Place the cursor over the desired program and press
To exit this window without selecting any program, use
Edit a new "Profile program"
To edit a new "Program", key the program number (between 0 and 999) and press
The CNC will display the window for the profile editor (see Operating manual of the M and MC models,
chapter 4 section "Profile Editor").
Once the profile has been edited, the CNC requests a comment to be associated with the "Profile
Program" just edited.
Enter the desired comment and press
If no comment is desired, press
Modify an existing "Profile program".
To modify a "Program", key in its number and press
The CNC will display the profile currently defined in the window for the profile editor.
One can: Add new elements at the end of the current profile.
Modify the data of any element.
Modify or insert chamfers, roundings, etc.
Delete elements from the element.
Delete an existing "Profile Program".
Press the cycle will show the profile programs already defined.
Place the cursor over the "Profile Program" to be deleted and press
The CNC will request confirmation.
Notes: The profile programs can also be accessed in the "M" mode because the CNC saves them
internally as P 997xxx.
Example: Profile program 123 is internally stored as P997123.
When saving a part-program containing a level-2 profile cycle out to an external device, PC, floppy
disk unit, etc. its associated profile program P997xxx must also be saved.
3. Work with operations or cycles
3.3 Profile milling operation