Fagor 8040 MC CNC, Руководство пользователя, Страница: 107 / 247

Chapter 3 - page 23
MC work mode
3.7 RECTANGULAR AND CIRCULAR POCKET CYCLES
To select these cycles press
Rectangular pocket cycle (Level 1)
One must define The starting point (X, Y), the pocket dimensions (L, H) and the machining
conditions in Z (Zs, Z, P, I, Fz)
One must also define the milling pass (
∆
), the finishing stock (
δ
) and the machining
direction
Rectangular pocket cycle (Level 2)
One must define The starting point (X, Y), the dimensions of the pocket (L, H), the inclination
angle (a), the type of corner and the machining conditions in Z (Zs, Z, P, I, Fz)
In the area for roughing data, define the lateral penetration angle (
β
), the milling
pass (
∆
) and the machining direction
In the area for finishing data, define the lateral penetration angle (
θ
), the finishing
stocks (
δ
and
δ
z
), the number of finishing passes (N) and the machining
direction
3. Work with operations or cycles
3.7 Rectangular and Circular Pocket cycles