Fagor 8040 MC CNC, Руководство пользователя

Страница: 83 / 247

Chapter 2 - page 21
MC work mode 2. Operating in JOG mode
2.7 Control of external devices
2.7 CONTROL OF EXTERNAL DEVICES
The CNC allows up to 6 external devices to be activated and deactivated from the keyboard. One of
these is the cooling fluid.
The activation and deactivation of the devices must be carried out by the machine manufacturer by
means of the PLC program.
The CNC will inform the PLC of the status of each one of the keys. The relevant Register bit will have
value 1 when the key is pressed and value 0 when this is not pressed.
The Register bit for each one of the keys is as follows:
The status of the light for each one of these keys must be controlled by the machine manufacturer
by means of the PLC program, with the MCLED* input variables shown in the figure being available
for this purpose.
Examples:
Control of the coolant: DFU B28R561 = CPL MCLED1
= CPL O33
Control of the tail-stock (O1). To activate or deactivate the tail-stock a number of conditions must
be satisfied such as spindle stopped, ....
DFU B30R561 AND (Remaining conditions) = CPL MCLED2
= CPL O34