fafnir TORRIX XTS Series, Техническая документация инструкция

Страница: 6 / 52

Page 3/ 47 Safety Instructions
2 Safety Instructions
The TORRIX XTS level sensor has been developed for level measurement of liquids in con-
tainers. The level sensor must be used exclusively for this purpose. The manufacturer accepts
no liability for any form of damage resulting from improper use.
The level sensor has been developed, manufactured and tested in accordance with the latest
good engineering practices and generally accepted safety standards. Nevertheless, hazards
may arise from its use. For this reason, the following safety instructions must be observed:
•
Do not change or modify the level sensor or add any equipment without the prior
consent of the manufacturer.
•
The installation, operation and maintenance of the level sensor only be carried out
by expert personnel. Specialised knowledge must be acquired by regular training.
•
Operators, installers and service technicians must comply with all applicable safety
regulations. This also applies to any local safety and accident prevention regula-
tions which are not stated in this guide.
The safety instructions in this guide are marked as follows:
If these safety instructions are not observed, it may result in the risk of acci-
dent or damages to the TORRIX XTS level sensor.
Useful information which ensures continued and correct operation of the
TORRIX XTS level sensor and makes your work easier.
REACH Regulation
The TORRIX sensors contain a lead-titanium-zirconium-oxide, which belongs to
the substances of very high concern (SVHC) according to Regulation (EG) No.
1907/2006 (REACH). A corresponding note can be found on our website at:
www.fafnir.com.