Page
23
/
47
Adjustment
7
Adjustment
7.1
TORRIX XTS Configuration
The configuration is done with the computer using the FAFNIR HART-Setup configuration
tool, see technical documentation
FAFNIR HART SETUP art. no. 350225
Configurations for the TORRIX XTS can also be done using the indicating and adjustment
module. Pressing the OK button changes the measured value display to the main menu of
the configuration.
After closing the configuration menu all changes are automatically stored and remain even
after turning off the TORRIX XTS.
Do not interrupt the power supply with active configuration menu, since the
configuration is not completely stored at voltage interruption.
When changing parameters are stored in the controller's data flash, the current
on the 4 … 20 mA interface is briefly set to 12 mA and then returns to the original
current.
Display of the main menu
Figure
17
: Configuration - Main Menu
Display of the sub-menu (in this case: language selection)
Figure 18: Configuration - Language
Main menu
Menu items available in the main menu
Sub-menu (in this case: language)
Active selection for this sub-menu
Menu items available in the sub-menu
More menu items available (
🠟🠟
)
Содержание TORRIX XTS Series
Страница 51: ...Blank Page...
