fafnir TORRIX XTS Series, Техническая документация инструкция

Страница: 4 / 52

Page 1/ 47 Characteristics
1 Characteristics
The TORRIX ... XTS ... is a high-precision level sensor from the TORRIX series with an addi-
tional display (XTS) for showing up to 3 different TORRIX measured values on the sensor
head.
The sensor has been developed for continuous level measurement of liquid media in con-
tainers. The measuring principle of the sensor uses the physical effect of the magneto-
striction and is largely unaffected by the temperature. This method is particularly ideal where
level measurements are required to be extremely accurate, such as in the chemical industry.
The TORRIX XTS is available with the following (optional) features:
•
Media-contacting probe tube of stainless steel (standard), Hastelloy or titanium
•
Straight probe tube with probe tube diameter 12 mm
•
Probe lengths from 200 mm to 6 m, as Flex version up to 22 m
•
Output signal 4- 20 mA and RS - 485 s erial interface
•
Communication via the HART® protocol
•
With temperature measurement
•
Use in potentially explosive areas with device protection levels Ga (Zone 0 only
with intrinsically safe version), Ga/Gb (Zone 0/1) or Gb (Zone 1)
•
Process connection as
screw-in
unit, flange or bypass
The different TORRIX XTS variants are listed in the table on the next page.
For information about the installation of the TORRIX XTS Flex, see:

TORRIX Flex Installation Guide multilingual, art. no. 35 0118
For the TORRIX device types without a display, see the technical documentation:

TORRIX (with side cable connection), art. no. 350335

TORRIX M12 (with M12 connector), art. no. 350164