![background image](http://html1.mh-extra.com/html/faac/estate-swing/estate-swing_instruction-manual_535564040.webp)
$
$2
Installing the Receiver
1) Locate the 5 Silver Pins on your
MASTER
Estate Swing board, located above
the battery.
2) Locate the
white
connector on the receiver.
3) Push the
white
connector from the receiver on the 5 pins on your FAAC board
with the dip switches of the receiver board facing the center of the Estate Swing
board.
Setting the Dip Switches
1) Set the dip switches 1-12 on the receiver by
switching them in the up or down position.
Record this dip switch combination
2) Slide off the battery cover of the transmitter
(located at the bottom front cover)
3) Set the dip switches in the transmitter to the
same settings as the dip switches on the receiver.
4) Repeat this for all of the transmitters.
Positioning the Antenna
Bend the antenna to go around the back of the
receiver board and down the left side of the
Estate Swing battery.
Содержание Estate Swing
Страница 1: ...Featuring ...
Страница 34: ... ...