7. NOTE: Returning to
the common point of ref-
erence during the last
step is important for ac-
curacy in this step.
From the front stop position turn the manual release key
counter clockwise
3 turns
.
This
will be the mounting position.
3 Turns Counter Clockwise -
This is the correct Open Gate mounting position.
,
8.
Insert the threaded rear fitting into the already clamped
post mounting bracket.
9.
Position the gate mounting bracket on a cross member of
the gate suitable for supporting the arm and bracket with the
gate in the
FULL OPEN POSITION pressed firmly
against the open stop
. Use a second C-clamp to hold it in
place.
10.
Check the levelness of your operator on the
Bottom
of the arm. Do not use the top to check levelness as it
is a sloped surface.
Make the appropriate adjustments,
and check your setback one last time to be sure the posi-
tioning did not shift during leveling.
Содержание Estate Swing
Страница 1: ...Featuring ...
Страница 34: ... ...
