![background image](http://html1.mh-extra.com/html/faac/estate-swing/estate-swing_instruction-manual_535564039.webp)
14.
After properly affixing the mounting brackets insert the arm
fittings into the mounting brackets. Using the provided nut and
washer on the bottom of the threaded
rear fitting attach the arm to the post
mounting bracket. Tighten until the is
no wobbling during motion but motion
is not restricted.
Insert the arm in
the brackets
15.
With the arm pin still turned 5 turns from the end position,
insert the pin in the gate mounting bracket and bushing. With
the front fitting in the gate mounting bracket and bracket
bushing, turn the manual release key
clockwise 2 turns until
the
gate
reaches
its
full open position.
6
$
34
Reverse the polarity of the wiring to the control
board for the operator arm(s) from the standard
wiring. For Push-To-Open connect the Brown
wire on the Left and Blue wire on the Right.
%
$
IMPORTANT:
After installing the arms with the gate in the
full open position
return the gates to
full closed
by using the
manual release key BEFORE
begin-
ning the learning process (page 12).
Содержание Estate Swing
Страница 1: ...Featuring ...
Страница 34: ... ...