FAAC Estate Swing, Инструкция по эксплуатации

Страница: 35 / 46

1. Set up open stop points for your gate.
The open stop points can be a plate on the
end of the gate that comes in contact with
an adjacent post or an industrial door stop.
(Many gates need an extension piece added
to make contact with the doorstop.
Examples of industrial
door stops
2. Using the method above, determine your 5” x 5” setback.
Once it is determined where your post mounting bracket
will be placed, use a C-clamp to hold the post mounting
bracket in place on the post.
, ,
Push-to-Open operation is a gate opener design with the
arm on the inside of the
gate and the arm pushes the gate open away from the property
, rather than pull-
ing it in towards the property as in standard operation. Push-to-Open is useful for
properties with inclining driveways, a lack of space for opener arm placement or
opening (i.e. a wall parallel with the driveway close to the post), or many other rea-
sons.
#*
!
The Push-to-Open setback is the standard
setback flipped horizontally.
Measure 5” back toward the property then make
a 90 degree turn towards the driveway. Measure
5” in towards the driveway, this point is the
back pivot point for your operator arm.
$+
Examples of stops