Programming
Quick Reference Card
For detailed instructions refer to owner’s manual.
800-35-GENIE.
WARNING: DO NOT use wall console until limits have been set.
WARNING: Bullet MUST be engaged to carriage BEFORE setting limits.
Setting Limits & Remote Programming
for IntelliG
®
, TriloG
™
& GPower
™
Models
PROGRAM
SET
PROGRAM
SET
–
+
HOLD
2 seconds
HOLD
2 seconds
2
Press and hold the
down arrow button (-)
for
2 seconds until the long LED comes on blue
(round LED remains off).
PROGRAM
SET
–
+
3
Release
down arrow button (-)
and the long LED
will begin flashing.
PROGRAM
SET
–
+
PROGRAM
SET
–
+
HOLD
4
Press and hold the
down arrow button (-)
until
garage door is fully closed on floor, then release.
PROGRAM
SET
PROGRAM
SET
–
+
5
Press and release the
Program Set button
(both
LEDs flash blue and go off).
The down limit is now set.
Setting Down Limits:
Setting Up Limits:
PROGRAM
SET
PROGRAM
SET
–
+
HOLD
2 seconds
HOLD
2 seconds
6
Press and hold the
up arrow button (+)
for
2 seconds until the long LED light comes on blue
(round LED remains off).
PROGRAM
SET
–
+
7
Release
up arrow button (+)
and the round LED
will begin flashing.
The up limit is now set.
PROGRAM
SET
PROGRAM
SET
–
+
9
Press and release the
Program Set button
(both
LEDs flash blue and go off).
PROGRAM
SET
–
+
PROGRAM
SET
–
+
HOLD
8
Press and hold the
up arrow button (+)
until door
is fully open, then release. Watch carriage as
it approaches the power head to avoid contact
with powerhead.
*If both LEDs turn RED at this time,
return to Step 1, Setting Down Limits.
P999-159 1M 1/13 JAR
