Ezgo 1600xd, Руководство по ремонту

Страница: 279 / 416

9
-17
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
5.3 FRONT DIFFERENTIAL CASE REMOVAL
Remove the front wheels. Then, remove the front axle
drive shaft assemblies (LH/RH). (For the removal pro-
cedures, refer to "5.1 Front axle disassembly.") 1.
UUVW833A
Unscrew the mudguard cover mounting screws (1)
(RH) and remove the mudguard cover (2). 3.
FRONT AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
During assembly, set the spring length "A" of the
front strut assembly to be 328 ± 3 mm (12.9 ± 0.12 in.).
Tighten each tightening section to the specifi ed
torque when assembling the front suspension
section.
•
UUVW831A
UUVW878A
(1) 21 Nm, 2.1 kgf-m, 15.1 lb-ft
(2) 25 Nm, 2.5 kgf-m, 18.0 lb-ft
(3) 41 Nm, 4.1 kgf-m, 29.5 lb-ft
(4) 35 Nm, 3.5 kgf-m, 25.2 lb-ft
IMPORTANT
As the front axle drive shafts for the left (1) and
right (2) are different, be careful not to mix them.
•
UUVW829A
IMPORTANT
Unscrew the front strut assembly mounting nuts (1)
with the 19 mm spanner to remove the strut assembly
(2). 2.
UUVW877A
UTV(EZGO향)_09_FRONT AXLE.indd 섹션1:17 UTV(EZGO향)_09_FRONT AXLE.indd 섹션1:17 2011-04-04 오후 4:15:53 2011-04-04 오후 4:15:53