Ezgo 1600xd, Руководство по ремонту

Страница: 96 / 416

3
-58
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
6.2 ENGINE COMPONENT DISASSEMBLY AND ASSEMBLY
6.2.1 CYLINDER HEAD
Set the engine on level surface and unscrew the
drain plug under the oil pan to drain the engine oil.
Remove the alternator or other components if nec-
essary.
1.
2.
UUVW259A
Unscrew the glow plug cord nut (1) and undo the
coolant return hose band (2) to disconnect the glow
plug cord and coolant return hose. 5.
UUVW258A
Unscrew the high-pressure pipe lock screw (1) and
the nut on the injection pump and injection nozzle
holder connection to disconnect the high-pressure
pipe (2) in order. 4.
Nut tightening torque .....24.5 ~ 34.3 Nm
2.5 ~ 3.5 kgf-m
18.1 ~ 25.3 lb-ft
Undo and remove the PCV hose band (1) and un-
screw the fi ve cylinder head cover bolts (M6, 2) and
two nuts (M6) to remove the cylinder head cover (3). 3.
UUVW257A
Bolt and nut
tightening torque ............ 48.1 ~ 55.8 Nm
4.9 ~ 5.7 kgf-m
35.5 ~ 41.2 lb-ft
UUVW260A
Unscrew the three rocker arm shaft mounting bolts
(M8) to remove the rocker arm shaft assembly us-
ing the 12 mm socket wrench.
Keep the push rods in removal order to install them
to their correct positions later.
Remove the bolts in order of C, A and B. When
installing the bolts, install them in reverse order of
removal, i.e. B, A and C, and tighten them evenly in
several steps.
6.
Mounting bolt (M8)
tightening torque ............23.5 ~ 27.5 Nm
2.4 ~ 2.8 kgf-m
17.4 ~ 20.3 lb-ft
UTV(EZGO향)_03_ENGINE.indd 58 UTV(EZGO향)_03_ENGINE.indd 58 2011-04-04 오후 3:43:09 2011-04-04 오후 3:43:09