Ezgo 1600xd, Руководство по ремонту

Страница: 224 / 416

7
-14
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
5. DISASSEMBLY, SERVICE AND ASSEMBLY
5.1 REAR AXLE CASE REMOVAL
(REAR
AXLE DISASSEMBLY)
Park the vehicle on fi rm and level ground, stop the
engine and apply the parking brake. 1.
4.2 DIFFERENTIAL LOCK CABLE LENGTH
UUVW507A
UUVW508A
Set the differential lock lever to the "UNLOCK" po-
sition. Then, adjust the differential lock cable length
to the bracket with the nut on the adjusting screw
from its mounting sections on both sides.
Set length for section E: 40 mm (1.575 in.)
To adjust the set length for the section F, set the dif-
ferential lever in the "UNLOCK" position on the rear
axle case side, pull the cable gently to fi t it into the
mounting bracket, and then adjust the cable length
so that the lever can be moved to the "LOCK" posi-
tion freely. Then, tighten the mounting nut.
1.
2.
Place a oil drain container under the rear axle case
and unscrew the fi ller plug (1) and drain plug (2) to
drain the oil. Then, install the plugs to their original
positions.
Remove the cargo bed.
2.
3.
UUVW682A
Lift the cargo bed, pull out the cargo bed support pole
snap pin (1) and the gas cylinder fi xing bolt(2). Then, put
the pole onto the guide and lower the cargo bed gently. •
UUVW683A
REAR AXLE - INSPECTION AND ADJUSTMENT / DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_07_REAR AXLE.indd 14 UTV(EZGO향)_07_REAR AXLE.indd 14 2011-04-04 오후 4:11:49 2011-04-04 오후 4:11:49