Ezgo 1600xd, Руководство по ремонту

Страница: 349 / 416

12
-11
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
4.2 PREHEATING AND POST HEATING
ELECTRIC SYSTEM - OPERATING PRINCIPLE
The post heating process makes the combustion
condition of engine better to reduce harmful
emissions which can be produced a lot right after
engine start in cold weather. It also helps engine
to reach its normal running condition faster by
expediting the warm-up process.
•
REMARK
- When the key switch is turned to “ON” position, the
display unit determines whether the preheating(or
post heating) is necessary or not using temperature
input signal from coolant temperature sensor. If the
coolant is less than 30
°C (86°F), the display unit gives
the signal to glow relay to activate glow plugs for 15
seconds of preheating time. At the same time, the dis-
play unit also gives the power to glow indication lamp on
the dash board for 8 seconds.
- The preheating seconds and indication seconds can
be shortened by turning the key switch to start posi-
tion and another 15 seconds of post heating starts
when the key is returned to “ON” position. The indi-
cation lamp is not activated during the post heating
period.
034
001
001
DISPLAY UNIT
PREHEA
T LAMP
OUTPUT
E
001 001
BATTERY
007 007
SLOW BLOW
FUSE
60A
007
005
005 005
003
003
075
075
075
033
034
021 021
0.5B
023
029
007
032
STARTER SWITCH
GLOW
RELAY
(70A)
GLOW PLUG
0.5GrY
0.5B
5.0R
5.0R
0.5L
Y
0.5L
Y
3.0R
3.0RB 3.0R
W
3.0R
W
0.85RB
0.5GrY
0.5Br
0.5Br
0.5Lg
0.5B
5.0BR
5.0R
0.5RG
5.0R
0.5LY
0.85LY
5.0R 5.0R 5.0R
3.0RW
TEMP
SENSOR
(DISPLA
Y UNITS)
5A
ASS'Y COMBI-METER
POWER
GROUND
MANUAL GLOW
START SIGNAL TO STOP
PREHEATING OR START
POST HEATING
UUVWAA4A
- The glow plugs can be activated manually by holding
the key in between “ON” and “START” position.
UTV(EZGO향)_12_ELECTRIC SYSTEM.in섹션1:11 섹션1:11 UTV(EZGO향)_12_ELECTRIC SYSTEM.in섹션1:11 섹션1:11 2011-04-04 오후 4:35:33 2011-04-04 오후 4:35:33