EZ Automation EZTouch I/O Flex Скачать руководство пользователя страница 8

Страница: 8 / 64

EZTouchPLC

8 / 64

Safety Considerations

Please follow all applicable local and national codes to ensure maximum safety

of the equipment and personnel. The installation and operational environment

must be maintained per the latest revision of these codes.

You are responsible to determine the codes to be followed and to verify the

compliance of equipment, installation, and operation with the latest revision of

these codes.

It is an absolute must to follow all applicable sections of:

-The National Fire Code

-The National Electrical Code (NEC)

-The National Electrical Manufacturer's Association (NEMA) codes

Safety Guidelines

Safety is the most important element of a proper system installation. Adhering

to these safety considerations ensures the safety of yourself and others, as well

as the condition of your equipment. We recommend reviewing the following

safety guidelines:

Disconnecting Main Power

The main power switch should be easily accessible to the operators and

maintenance personnel. It is important to make sure that all other

sources of power including pneumatic and hydraulic are de-energized

before starting the work on a machine or process controlled by the HMI.

Safety Circuits

Most of the machines are installed with safety circuits such as limit

switches, emergency stop push buttons, and interlocks. These circuits

should always be hardwired directly to the

EZTouchPLC

unit.

These

devices must be wired in series so that when any one device

opens, the

unit is automatically de-energized. This removes power to the

machine.

These circuits should not be altered in any case, since this could

result in

serious injury or damage to the machine.

Fail-Safe Operation

Our products are not fault-tolerant. They are not designed or intended

for use as online control equipment in hazardous environments requiring

fail-safe performance, such as in operation of nuclear facilities, aircraft

navigation or communication systems, air traffic control, direct life-

support machines, weapons systems, clutch control systems on presses, in

which the failure of the product could lead directly to death, personal

injury or severe physical or environmental damage. External fail-safe and/or

redundant components are required to make your control system fail-safe.

Содержание EZTouch I/O Flex
































































Результаты поиска

Содержание EZTouch I/O Flex

Отзывы:

Похожие инструкции для EZTouch I/O Flex

Бренды по названию

Популярные бренды

EZ Automation EZTouch I/O Flex, Инструкция по эксплуатации

Результаты поиска

Содержание EZTouch I/O Flex

Отзывы:

Похожие инструкции для EZTouch I/O Flex

Бренды по названию

Популярные бренды