EZ Automation EZTouch I/O Flex, Инструкция по эксплуатации

Страница: 38 / 64

EZTouchPLC
38 / 64
Transfer a Project
After a project is complete, the next step is to transfer the project to the
EZTouch I/O Flex
C unit. When editing projects online, programming
information is automatically sent to the unit once the project is saved. When
editing in an off-line mode, the project information will need to be transferred.
To transfer the project through the serial connection or Ethernet port, follow the
steps outlined below:
From the Project drop down menu, select File > Transfer to Panel . A dialog box
similar to the one below will appear.
Transferring via USB programming cable:
1.
Please connect your USB programming cable to the panel and your computer
prior to launching the EZ Series Editor Software.
2.
Under Transfer To , select Both in order to transfer both the created Panel
program and the PLC ladder logic project.
3.
Select Serial (COM xx) as method of transfer under PC to Panel Connection.
And then click Start .
Transferring via Ethernet:
1.
Select Ethernet as PC to Panel Connection.
Note : Click the Specify IP/Port button in order to make adjustments to the IP
Address or Port.
2.
Under Transfer To , select Both in order to transfer the created Panel program
and the PLC ladder logic project.
3.
Then click Start .
When finished, a Transfer Completed message will be displayed. Click OK to
continue and the project is now transferred.