- 4 -
3
Names and functions of control assembly
3-1 Control panel
⑧
SET key
⑦
DOWN key
⑥
UP key
⑤
RUN/STOP
key
④
HEATING lamp
③
RUN lamp
①
Power switch
②
Display
No
Name
Function
①
Power switch
Turning this switch ON will turn power ON.
②
Display
The presented measured temperature of the bath, or the set temperature in
the temperature setting mode is displayed.
Alarm is displayed when an abnormal condition occurs.
③
RUN lamp
Comes on when temperature control is started.
④
HEATING lamp
Comes on while the heater is supplied with power.
⑤
RUN/STOP key
Used to switch start/stop of temperature control.
⑥
UP key
Each time this key is pressed, the set temperature will rise by 1
℃
.
The value increments continuously if it is kept pressed.
⑦
DOWN key
Each time this key is pressed, the set temperature will goes down by 1
℃
.
The value decrements continuously if it is kept pressed.
⑧
SET key
Used to switch between the temperature setting and the measurement modes.