background image

The unit is not explosion-proof. Take extreme 
care no to spill any liquid when using a 
flammable specimen or organic solvent.
This product is designed to operate with the 
internal mechanism in the hot bath rotating due 
to its functionalities and features. Also, this 
product contains glass components and requires 
careful handling in order to avoid a personal 
injury or accidents. 
Most of such accidents can be 
prevented if such danger can be assumed 
beforehand.

To ensure the safety, this manual defines the
information on such matters as requiring particular
care in the safety for each danger and attaches the
alert mark and signal word.
It is recommended to follow the instruction to ensure
the safe use of the product.

We have undertaken thorough verification concerning the possible occurrence of risk when
using the product, but prediction of all and every kind of risk is extremely difficult. Namely,
cautions contained in this manual are not necessarily all of possible risks.

However, if the product is operated according to the procedure described in this manual, the
safe operation and work is ensured. Be sure to pay utmost care during handling of the product
to prevent accident or failure of the product.

Alert mark 
Signal word 

Definition 

Wrong handling can cause the possibility of the death or heavy 
injury of the user. 

Wrong handling can to cause the risk of injury of the operator 
or physical damages to operators.

Warning 

Caution 

Important Safety Notice

1. Warning Signal Word

Содержание SB-1300























Отзывы: