Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
- 11 -
5-3 How to set the alarm function
You can set the upper temperature for the upper temperature limit alarm [A-0] or the power outage recovery
function in the setting of the alarm function.
※
You cannot set the sensor alarm [F-1] or the outside the measurable temperature range alarm [---].
１．
Setting the upper temperature limit alarm
(1) Pressing the SET key in the alarm function setting mode ([A-0]
indication on) will indicate the setting for the upper
temperature limit. (Upper temperature limit setting flashes)
(2) Use the UP key and the DOWN key to set the upper
temperature limit.
Each press of the UP key increases the set temperature by 1
℃
and each press of the DOWN key decreases it by 1
℃
.
(Keeping them pressed will continually increase or decrease the
value.)
※
Upper temperature limit setting range
：
+10
℃～
120
℃
※
The temperature is set at the upper limit temperature
“120
℃
” at the time of factory shipping.
(5) Pressing the SET key switches to the alarm function setting
mode and the setting of the upper temperature limit is
completed.
([A-0] indication on)
(6) Press the SET key long for about 5 seconds to return to the
measurement mode.
(1) Press the SET key longer in the measurement (current
temperature indication on).
(2) Pressing long for about 5 seconds switches to the alarm
function setting mode.
([A-0] indication on)
(3) Use the UP key and the DOWM key to switch the items
for the alarm function setting.
[A-0]…Setting of the upper temperature limit alarm
function
[A-4]…Setting the power outage recovery function
＊
Returning to the measurement mode
Pressing the SET key long for about 5 seconds during
the alarm function setting mode ([A-4] or [A-0]
indication on)
Pressing the SET key long for about 5 seconds returns
you to the measurement mode.
(current temperature indication on)
＊
Shifting to the alarm function setting mode
Keep pressed longer for about 5 sec.
UP key or DOWN key
UP key or
DOWN key
Keep pressed longer for about 5 sec.
Input of settings
Flash
Flash
