extronics iUPS101, Руководство по эксплуатации

Страница: 9 / 70

Operating Manual
9
3 Installation and Set-to-work
3.1 Installation
The iUPS101 is supplied ‘close-coupled’ to an Ex ‘e’ terminal box using potted cable
transits. All equipment is suitably certified, and assembled under the relevant codes
of practice (see section 7). This allows simple connection to suitably rated Ex ‘e’
cable terminals by the user.
For reference, the drilled cable entries on the bottom face of the Ex ‘d’ enclosure can
be up to 1-1/2”NPT type or up to M40. The information on the exact type of entry can
be found on the enclosure rating plate. The Ex ‘d’ box should never be opened apart
from scheduled maintenance / inspection by a qualified person. Please see Safety /
Information notes in section 2.
The iUPS101 is only permitted to be mounted in a vertical orientation.
The system weighs approximately 90Kg, so suitable lifting equipment and safety
provisions must be taken to ensure safe installation.
Correct Vertical Installation:
Fig 3.
Important! The information shown on the ATEX rating plate is in relation to the
safety of the equipment. The functional operating parameters of the
system may vary slightly. Please see section 7 for details