extronics iUPS101, Руководство по эксплуатации

Страница: 33 / 70

Operating Manual
33
Confirm your selection by using the key SET.
To escape at any time, use the key ESC to return to the starting display.
The following information is available:
With regard to the grid input
AC In input voltage
AC In input current
AC In input power
Input frequency
The value of the source max current (Input limit)
Energy from AC-In of the previous day
Energy from AC-In of the current day
With regard to the grid output
Output voltage
Output current
Output power
Output frequency
Consumers energy of the previous day
Consumers energy of the of the current day
With regard to the battery
Battery voltage
Actual charge current of the batteries
Programmed charge current
Ripple voltage of the batteries
Charging phase (bulk charge, absorption, float charge, etc.)
Dynamic compensation of the battery (compensation of the thresholds due to the internal
resistance of the battery)
Operating mode (inverter, charger, etc.)
Battery temperature (if a sensor is present)
The battery temperature’s inherent compensation (if a sensor is present)
Discharge of battery of the previous day
Discharge of battery of the current day
Remaining time of the phase of absorption, equalization or reduced absorption
State Of Charge of the battery (SOC) (if a BSP is présent in the system)
If a piece of information is not available, the screen displays - - - -.
Information on the auxiliary relays as well as the output and transfer relays appears
as open or closed in the synopsis according to their current state.
Auxiliary relays are indicated with their corresponding number as well as the letter A
if they are operating in automatic mode and M if they are controlled manually.
Other letters may be displayed with regard to specific programming. Please refer to
the corresponding chapter.
The general operating mode of the combi IUPS101 is displayed in large letters on the
two visualisation screens (ON or OFF).