extronics iUPS101, Руководство по эксплуатации

Страница: 32 / 70

Operating Manual
32
6.10 Information on the operating mode of the installation
There are two different views for displaying information on the system: a simplified
and a configurable display. When one of these two displays is visible, it is possible to
activate or deactivate the system. For further information, please refer to the
paragraph on activating and deactivating the combi IUPS101.
The simplified display only indicates the current time
and the mode of the IUPS101 (ON or OFF)
The configurable display shows the system in its entirety, represented by a synopsis
of distinct information blocks.
A Information on the battery
B Information on the grid input
C Information on the grid output
D Information on the auxiliary contacts
E Information on the transfer and output relays
F Information on the state of the maximum current of the source (Input limit) (L) and of
the Smart-Boost (B: Boost activated, L: input limited)
G Information on possible locking of the function (G)
Two pieces of information related to blocks A, B and C may be viewed
simultaneously. To change displayed information, proceed as follows:
Press the key SET (one of the pieces of information
is displayed in reverse video).
Go to the value to be changed by using the UP and
DOWN keys.
Enter into modification by using the key SET. You
may now view the values that can be displayed in
this area.
Using the keys UP and DOWN, select the new
information that you want to see appearing.