extronics iUPS101, Руководство по эксплуатации

Страница: 25 / 70

Operating Manual
25
5 Operation
5.1.1 Powering up the installation
The power up of the iUPS101 must be carried out in the order given below. Any
power off must be carried out in the reverse order.
Initially, the display will be blank. Press the reset button on the front panel (See Fig
4.0) - this will close the contactors within the UPS, and connect the batteries. The
green ‘battery healthy’ lamp should illuminate, and the display should come on. You
can now power on the AC input to the UPS.
5.1.2 Activating and deactivating the iUPS101
When one of the displays is visible, it is possible to activate or deactivate the
IUPS101. To do this, simply press the key ESC. The key request on the screen
indicates whether you are going to activate or deactivate the unit.
Once the key has been pressed, you must confirm
your choice by using the key YES. If you do not want
the action to be carried out, it can be cancelled by
pressing the NO key.
Note: This is a comprehensive signal and leads to the stoppage or starting of
all iUPS101s connected to the remote control.
Fig 4.0
Battery
Healthy