extronics iUPS101, Руководство по эксплуатации

Страница: 23 / 70

Operating Manual
23
If the operator or installer requires different behaviour for the auxiliary contacts, they are both
freely and individually programmable depending on the battery voltage and the inverter
status and the internal clock. The intelligent programming of the auxiliary contacts allows
many applications to be considered such as:
Automatic start-up of the generator (two or three wires)
Automatic load shedding of the inverter (2 sequences)
Global or individual alarm
Automatic disconnection (load shedding) of the source
4.2.12 Remote Emergency Disconnect
Note: This is a comprehensive signal and leads to the stoppage of the
iUPS101
Important: This function is disabled by default, and can only activated by the
removal of Jumper links LK2 and LK3 on the battery protection PCB
contained within the Ex’d’ enclosure of the iUPS101. See Fig 4.1 below
for location of the jumper links.