Extron electronics NetPA U 1002, Руководство пользователя

Страница: 85 / 118

NetPA Ultra Series • Dante Controller
1
2
3
Figure 116. Device View Screen — Renaming an Amplifier
Renaming a Transmitter
The default names shown in the
Dante Transmitters
column are extracted from the Dante
interface of the connected device (see
figure 117
,
1
, on the next page). The NetPA Ultra
Series receivers are labelled
Line Output 1
through
Line Output 4
. Follow the instructions
below to rename a transmitter.
To rename a NetPA Ultra Series transmitter:
1. From the
Device
menu on the
Network View
screen, select
Device View
, or press
<
Ctrl+D
> on the keyboard. The
Device View
dialog box opens.
2. From the
(Select a Dante Device..)
drop-down menu, select the name of the
desired NetPA Ultra Series amplifier (see figure 117 ,
1
on the next page).
3.
On the
Device View
screen, select the
Transmit
tab (
2
).
4. Click on the name of the receiver to be renamed. The name becomes a text box with a
cursor (
3
).
5. Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
@
,
=
, and
.
(period).
6. Press
<Enter>
on the keyboard to confirm the name, or click another channel text box.
7.
Repeat steps 4 through 6 to rename additional receiver channels.
8. When finished renaming receivers, close the
Device View
dialog box.
Finding a Dante Device IP Address
To find the IP address of a Dante device, the name of the device is needed (see Renaming
the NetPA Ultra Series Amplifier in Dante Controller on page 76).
NOTE: If the NetPA Ultra Series amplifier has not been renamed, its default name
consists of the product name followed by a hyphen, plus the last 6 digits of the device
MAC address (for example,
NetPA-U-xxxxxx
).
1. Open Dante Controller.
2. On the
Dante Controller-Network View
screen, click the
Device Info
tab (see
figure 117 ,
1
, on the next page).
3. On the
Device Info
page, locate the name of the NetPA Ultra Series in the
Device Name
column (
2
). The IP address is located in the
Primary Address
column (
3
). In the example, the IP address for the connected NetPA Ultra Series
is
192.168.254.254
.
67 Device View Screen Renaming a Receiver
Finding a Dante
Device IP
Address
79