NetPA Ultra Series • Remote Control and Configuration
Group Masters
Command
ASCII command
Unit Response
Unit Response: Verbose 2/3
NOTES:
•
For information on configuring groups, see Groups on page <?>.
•
A group must have assigned members for these commands to have an effect.
•
For X1*, a positive (+) value is assumed unless a negative (-) value is specified.
•
If entering an X1* value outside the valid range for the group or outside the soft limits, the amplifier responds with:
For gains
:
The maximum upper/lower range of the soft limit or maximum upper/lower range of the group.
For mutes
:
E13 error (invalid parameter)
X1^
,
X1&
,
X1*
, and
X2)
values can be sent without leading zeroes.
Set Group
Set Soft Limits
E
L
X1$
*
X1^
*
X1&
GRPM
}
GrpmL
X1$
*
X1^
*
X1&]
View Soft Limits
E
L
X1$
GRPM
}
X1^
*
X1&]
GrpmL
X1$
*
X1^
*
X1&]
Set +/- dB
E
D
X1$
*+/-
X1*
GRPM
}
GrpmD
X1$
*
X1*]
Set Mute
E
D
X1$
*
X1*
GRPM
}
GrpmD
X1$
*
X1*]
Increment
E
D
X1$
*
X2)
+GRPM
}
GrpmD
X1$
*
X1*]
Decrement
E
D
X1$
*
X2)
-GRPM
}
GrpmD
X1$
*
X1*]
View master value
E
D
X1$
GRPM
}
X1*]
GrpmD
X1$
*
X1*]
Key:
X1$
Group number 1 – 32.
X1^
Soft limit High value
X1&
Soft limit Low value
X1*
Group master value [For gain value with a resolution to 0.1, multiply by 10. For mute values, use 0 or 1.
X2)
Increment or decrement value. [For gain value with a resolution to 0.1, multiply by 10. For mute values, use 0 or 1.]
96
