NetPA Ultra Series • Dante Controller
1
Figure 111.
Device View and Select a Dante Device Drop-Down
NOTE:
If there are multiple NetPA Ultra Series devices connected to the network
that have not been renamed, obtain the Dante interface media access code
(MAC) address of the desired device from the white label on the rear panel of the
device in order to identify it in Dante Controller.
The
Device View
dialog populates with the selected NetPA Ultra Series information.
Figure 112.
Populated Device View Dialog Box
6.
Click the
Device Config
tab (see figure 113,
1
) to open the
Device Config
page.
7.
In the
Rename Device
panel, enter the new name of the device in the text field. No
spaces are allowed in the name. Names should be significant identifiers. For example,
enter
NetPAUAmplifier-MainRack
(
2
).
8.
Click
Apply
(
3
). A confirmation prompt opens.
1
2
3
Figure 113.
Device Config Dialog, Rename Device
9.
Click
Yes
(
4
) to confirm the new name, then close the
Device Configuration
dialog
box. The new name is written to the Dante interface of the NetPA Ultra Series amplifier.
Repeat as necessary for all devices.
4
Figure 114.
Rename Device Confirmation Dialog Box
62
Device View and Select a Dante Device Drop-Down
63
Populated Device View Dialog Box
64
Device Config, Rename Device
65
Rename Device Confirmation Dialog Box
77
