NetPA Ultra Series • Remote Control and Configuration
Audio Level Control
Command
ASCII command
Unit Response
Unit Response: Verbose 2/3
NOTE:
The command format is the same regardless of the control point, but the acceptable gain range varies depending on the control point.
•
The mic/line input gain range is -18 dB to +60 dB in 0.1 dB increments.
•
The pre-mixer gain and virtual return gain range is -100 dB to +12 dB in 0.1 dB increments.
•
The post-mixer gain and virtual return gain range is -12 dB to +12 dB in 0.1 dB increments. Post-mixer trim cannot be muted
•
The output attenuation gain range is -100 dB to 0 dB in 0.1 dB increments.
•
All responses are shown in Verbose Mode 2 or 3.
Set gain level
E
G
X7@
*
X7#
AU
}
DsG
X7@
*
X7#]
Set gain on OID
X7@
to a value of
X7#
dB.
Read gain level
E
G
X7@
AU
}
DsG
X7@
*
X7#]
Set gain on OID
X7@
to a value of
X7#
dB.
Audio Mute
Audio mute
E
M
X7@
*1AU
}
DsM
X7@
*1
]
Mute audio at
X7@
.
Audio unmute
E
M
X7@
*0AU
}
DsM
X7@
*0
]
Unmute audio at
X7@
.
Mute status
E
M
X7@
AU
}
DsM
X7@
*
X7$]
Key:
X7@
Target OID
See
Object ID
on page <?>96.
X7#
Gain value
Levels use a 10x multiplier system with no decimal spaces. For example, a level of +10.4 dB would be entered as
104
and a level of -3.2 dB would be entered as
-32
X7$
Mute
0 =
disabled
1 =
enabled
95
