NetPA Ultra Series • Configuration Tools
for building block files to import to DSP Configurator.
3
Delete Building Block Button
— (see
figure 106
on page 70) Click the
button to
delete the currently selected building block.
4
Restore Default Building Blocks Button
— (see
figure 106
on page 70) If default
building blocks that come installed with DSP Configurator are deleted, click the
button to restore them.
NOTE:
Only the default building blocks can be restored with this function. User
created building blocks are not restored if deleted.
TIP:
To avoid accidentally deleting user created building block files, once they are
created, export them to a safe location on the disk. This creates a backup copy of
the building block file, should it be deleted by the user by mistake.
5
New Folder Button
— (see
figure 106
on page 70) Click the
button to create a new
folder that building blocks can be dragged into. Upon creation, a default folder name is
highlighted and a custom name can be entered. Click a folder name twice to edit the
folder name.
6
Building Blocks Panel
— (see
figure 106
on page 70) This panel contains folders and
building blocks. Click and drag building blocks to change their order or place them
inside folders. Click a building block name twice to edit the building block name. Click a
folder name twice to edit the name of the folder.
Device Settings
The
Device Settings
dialog box provides access to general settings of a NetPA Ultra
Series amplifier. Select
Tools > Device Settings
to open the
Device Settings
dialog
box. Device settings are only available when connected live to a device.
Within the
Device Settings
dialog box, the following tabs are available:
•
Unit Info
•
Serial Settings
•
Dante Device
Unit Info
The
Unit Info
tab displays the unit name, firmware version, device model, device part
number, and device MAC address.
New Folder Button
Device Settings
Unit Info
71
