Extron electronics NetPA U 1002 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 118

background image

FCC Class B Notice

NOTE:

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. There is no guarantee that interference will not
occur. If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of the manufacturer could void the user’s authority
to operate this equipment.

NOTE:

For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics see the

Extron Safety and Regulatory

Compliance Guide

on the Extron website.

«
...
2
3
4
5
6
...
»

Содержание NetPA U 1002























































































































Отзывы:

Нет отзывов

Похожие инструкции для NetPA U 1002

Бренд: NAD Страницы: 2

Бренд: Fender Страницы: 20

Бренд: Fender Страницы: 11

Super Sonic 112

Бренд: Fender Страницы: 4

Бренд: Fender Страницы: 20

Бренд: D.A.S. Страницы: 11

Бренд: Tabor Electronics Страницы: 38

Бренд: t.amp Страницы: 12

Бренд: t.a.c. Страницы: 64

Stereo Festival II

Бренд: Harman Kardon Страницы: 16

Extension Cabinet

Бренд: Marshall Amplification Страницы: 12

Sona Flex SF-16B

Бренд: Audio Authority Страницы: 8

Бренд: DaytonAudio Страницы: 4

Бренд: Technalogix Страницы: 55

Бренд: RE Audio Страницы: 12

JBL Stage A6004

Бренд: Harman Страницы: 4

Бренд: Balanced Audio Technology Страницы: 18

Subamp SBA-12000

Бренд: Lynx Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды