Extron electronics DVS 605, Руководство пользователя, Страница: 112 / 133

Image Settings Page
From this page signal sampling and picture control settings can be set, user and input
presets can be saved and recalled, and overscan settings can be applied.
Click this button to open the
Image Settings
page.
1 2
3 4
5
Figure 79. Image Settings Page
Signal Sampling
In this panel (see figure 79,
1
), settings for the currently selected input signal can be
adjusted. Adjustable fields are: the number of active lines, active pixels, total pixels,
horizontal and vertical start settings, and the pixel phase. In addition, an Auto-Image (with
Fill or Follow modes) can be executed on the input.
In the
Signal Sampling
section, adjust an input signal setting by entering a value or
clicking the up and down arrows in the field associated with the setting. An asterisk beside
a chosen value for a signal sampling setting indicates that it is a default value for the
applied input signal.
An Auto-Image can also be executed on the current input. Auto-Image automatically
sizes and centers the selected input. If an unknown input is connected to the device, the
processor measures and estimates the resolution of the incoming video.
To perform an Auto-Image:
1. Click the Auto-Image button. A drop-down menu opens (see Auto-Image on
page 99 for steps to set automatic activation).
2.
Select Auto-Image : with fill (to fill the entire video output) or Auto-Image : with follow
(to maintain the aspect ratio of the input).
79
DVS 605 • Using the Default Web Pages 104 104