Extron electronics DVS 605, Руководство пользователя, Страница: 47 / 133

DVS 605 • SIS Communication and Control 39
X3%
=
Video switching duration, from
2
(
0.2
sec) to
50
(
5.0
sec).
Default value is 3 or 0.3 sec
X3^
=
HDMI output format:
0
= Auto (based on sink EDID), default
1 = DVI
2 = HDMI 444 RGB
3
= HDMI 444 YUV “FULL”
4
= HDMI 444 YUV “LIMITED”
5
= HDMI 422 YUV “FULL”
6 = HDMI 422 YUV “LIMITED"
X3&
=
Auto switch mode:
0
= Disable (default)
1 = Gives priority to the highest input
2 = Gives priority to the lowest input
X3* = Audio volume range: -100 dB to 0 dB, in 1.0 dB steps,
default =
-30
dB (with leading “-”); where
0
=
0
dB (max volume output)
X3(
= Audio output format:
1
= Dual mono
2
= Stereo (default)
X4)
=
Audio gain and Attenuation:
-53
through
+24
dB, (with leading “+” or “–“)
X4!
= Audio source:
0
= Follow Main window (default)
1
= Follow PIP window
2
= Toggle source
X4@
=
Audio input type:
0
= None, input is muted (EDID has no CEA extension)
1
= Analog, 5-pole captive screw (EDID has no CEA extension)
2 = 2Ch digital, embedded in HDMI input, (2Ch PCM audio requested from source via
EDID)
3
= Full digital (via EDID to allow any digital audio format from source)
4
= 2Ch digital, Auto (2Ch PCM audio requested from source via EDID), scaler uses
embedded digital audio when present, or defaults to the analog 5-pole captive screw
5 = Full digital auto (Full audio is requested from source via EDID). Scaler uses
embedded digital audio when present, or defaults to input analog 5-pole captive
screw.
NOTES:
•
Inputs 1 and 2 can only be set to
X4@
= 0 (all models) or 1 (audio model only).
Attempting to set these inputs to any other format gives an
E14
error message.
•
Non-audio models of the DVS 605 allow X4@ = 0 on inputs 1 and 2, and
X4@ =
0
,
2
,
or
3
on inputs 3, 4, and 5.
X4#
=
Static audio delay,
0
through
255
milliseconds (default is
0
)
NOTE: The static audio delay is in addition to the automatic audio delay that is
applied by the DVS 605 to compensate for internal video processing.
X4$
=
Video signal status
0
= Video / TMDS signal not detected
1 = Video / TMDS signal detected
X4%
=
Power save modes
0 = Full power mode (default)
1 = Low power state
X4^
=
Screen saver status
0 = Active input detected, timer not running
1 = No active input, timer is running, output sync still active
2
= No active input, timer has expired, output sync disabled