Extron electronics DVS 605 Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 133

Extron electronics DVS 605 Скачать руководство пользователя страница 102

Using the Default
Web Pages

The DVS 605 features an internal web server, displayed as a set of default web pages.
These pages allow you to configure and operate the DVS 605 unit via a LAN or WAN
connection through the RJ-45 port, using a web browser such as the Microsoft

®

Internet

Explorer

®

8 or later, Mozilla

®

Firefox

®

6 or later, Google Chrome

™

9 or later, Apple

®

Safari

®

4 or later.

NOTE:

If you are using Internet Explorer, compatibility mode must be turned off (see

Turning Off Compatibility Mode

on the next page for details).

This section gives an overview of the default web pages, which are always available and
cannot be erased or overwritten.
Topics that are covered include:

•

Accessing the Default Web Pages

•

Navigating the Default Web Pages

Accessing the Default Web Pages

Access the DVS 605 through the embedded web pages as follows:

1.

Double-click the web browser icon on the PC desktop to launch the web browser.

2.

Click in the browser

Address

field.

3.

Enter the unit IP address in the browser

Address

field.

NOTE:

If the local system administrators have not changed the value, the

factory-specified default is DHCP set to OFF, IP address =

192.168.254.254

.

4.

Press the keyboard <

Enter

> key. The DVS 605 is shipped password-protected and

the

Enter

Network

Password

page opens.

NOTES:

•

The default

Username

is

Admin

or

User

. The factory configured passwords

for all accounts on this device have been set to the device serial number.

•

If the device is reset back to default settings, there will be no passwords.
New passwords need to be configured to secure the device (see

5.

Click in the

Password

field and type in the appropriate administrator or user

password if prompted.

6.

Click

OK

.

DVS 605 • Using the Default Web Pages

94

«
...
100
101
102
103
104
...
»

Содержание DVS 605






































































































































Отзывы:

Нет отзывов