Extron electronics DVS 605, Руководство пользователя, Страница: 129 / 133

Password Page
This page allows the user to change an administrator and user password on the device.
Click this button to open the page.
1
2
3
Figure 93. Password Page
Administrators and users can view any setting on the device. Administrators have the
ability to make adjustments to any setting. Users can only make changes to the following:
• Input Selection • User Preset Recall • Input Preset Recall
• PIP Preset Recall • Auto + Fill • Aspect Ratio
• Auto-Image • Auto + Follow • Volume
•
PIP On/Off
•
PIP Swap
•
Audio Mute
• Freeze • Video Mute
NOTE:
The DVS 605 is shipped password-protected. A user name entry is required
for connection. Enter admin for administrator-level access or user for user-level
access. These user names must be entered in lowercase characters. After entering
the appropriate user name, enter the device serial number in the
Password field.
If the device is reset back to default settings, there will be no passwords. New
passwords need to be configured to secure the device.
To create or change an administrator password (see figure 93,
1
) :
1. In the Administrator Password field, enter the desired administrator password.
2. In the Confirm Password field, re-enter the administrator password.
3. Click Save (
3
).
To create the user password:
NOTE: A user password cannot be set until an administrator password has been
entered.
1. In the User Password field, enter the desired user password (
2
).
2. In the Confirm Password field, re-enter the user password.
3. Click Save (
3
).
NOTE: When passwords are set, a notification to close and restart the browser
appears.
93
DVS 605 • Using the Default Web Pages 121