Extron electronics DVS 605, Руководство пользователя, Страница: 123 / 133

Mute Video and Sync
When enabled, this option allows a connected display (sink) to go into power saving
(standby) state when no signal is present (see
figure 85 on page 113,
6
).
To enable this option, click the Mute Video and Sync button. The button turns blue to
indicate the option is active.
To disable this option, click the
Mute Video and Sync
button. The button reverts to
gray, indicating that the option is inactive.
OSD Input Information
The on-screen message is displayed for a user-defined duration ( 1-501 seconds) after an
input switch.
NOTE: Setting this value to zero disables the on-screen display message.
To set the On Screen Display to display messages
:
1. Select the Enable On Screen Display checkbox (
7
).
2. To adjust the duration that messages are displayed on screen, click the up and down
arrows or enter a value in the Duration on Screen field.
To disable the On Screen Display message
, clear the Enable On Screen Display
checkbox or set the duration to zero.
HDCP Mode
When enabled, the HDCP Mode can be set to either follow the current input with or
without DVI trials, or always encrypt the output, with or without DVI trials.
To set the HDCP Mode, click the desired radio button (
8
):
• Follow Input — Encrypts the output only when required by the selected input
source.
• Always Encrypt Output — Always encrypts the output, regardless of the HDCP
status of the selected input source.
•
Follow Input (with continuous DVI trials) — Encrypts the output only
when required by the selected input source. Use this setting when DVI sink devices
initially pass HDCP encrypted content, but intermittently display a green HDCP
notification screen after a power cycle or resuming from sleep mode.
• Always Encrypt Output (with continuous DVI trials) — Always
encrypts the output regardless of the HDCP status of the selected input source.
Use this setting when DVI sink devices initially pass HDCP encrypted content,
but intermittently display a green HDCP notification screen after a power cycle or
resuming from sleep mode.
DVS 605 • Using the Default Web Pages 115