Extron electronics DVS 605, Руководство пользователя, Страница: 109 / 133

Digital output signal format
Click the arrow and from the drop-down menu box (see figure 76 ,
5
on the previous
page) select an applicable signal format. Selectable formats are:
• Auto (based on sink/display EDID)
•
DVI
•
HDMI RGB
• HDMI YUV 444 Full
• HDMI YUV 444 Limited
•
HDMI YUV 422 Full
•
HDMI YUV 422 Limited
Switch transition
Select either cut or dissolve (
6
), as applicable, to set the transition effect when switching
inputs.
Genlock/AFL
Where applicable, SDI genlock or input signal genlock can be applied, or genlock can be
turned off (see
Genlock/AFL modes on page 20 for details). Select as desired (
7
).
NOTE:
The SDI genlock option is available only on DVS 605 D and DVS 605 AD
models.
Test pattern
To aid display device setup and optimization, select a test pattern (
8
) from the drop-
down menu (see Test Pattern on page 25 ).
NOTE: No input signal is needed when using a test pattern for display device setup.
DVS 605 • Using the Default Web Pages 101