Extron electronics DVS 605 Скачать руководство пользователя страница 34

Страница: 34 / 133

DVS 605 • Operation

Temperature

This is a read-only menu that gives the internal temperature (degrees Celsius and
Fahrenheit) of the connected device. No adjustments can be made.

Factory Reset

This menu allows the user to reset the device to the factory default settings.
Press and hold the

Auto

button until the LCD display reads

RESETTING

, then release the

Auto

button. The device is reset.

View Comm Settings

The current RS-232 and IP settings are read-only with this menu. To make any setting
adjustments, the hidden

Edit

Comm

Settings

menu must be accessed (see below).

Press

Next

to go through each sublevel to view the following: serial port (baud rate and

communication type), MAC address (cannot be changed), DHCP status (on or off),
IP address, subnet mask, and gateway address.

NOTE:

To enter the hidden

Edit

Comm

Settings

menu, press and hold in the input 5

and

Next

buttons simultaneously. The

Edit

Comm

Settings

menu appears.

SERIAL PORT

9600 RS232

EDIT COMM

SETTINGS

Rotate to
change baud rate.

DHCP MODE

<On>

Rotate either to
turn DHCP mode
On or Off.

Rotate to select
octet field. Rotate
to change IP address.

Rotate to select
octet field. Rotate
to change subnet
mask address.

Rotate to select
octet field. Rotate
to change gateway
address.

“Hidden” Menu

S 255.255

M 000.000

G 192.168

W 000.000

I 192.168

P 254.254

Figure 22.

Edit Comm Settings Menu

Exit Menu

From this submenu, press the

Menu

button to return to the

User Presets

menu cycle, or

press the

Next

button to exit the menu and return to the default cycle.

Содержание DVS 605






































































































































Результаты поиска

Содержание DVS 605

Отзывы:

Extron electronics DVS 605, Руководство пользователя, Страница: 34 / 133

Результаты поиска

Содержание DVS 605

Отзывы: