Extron electronics DVS 605, Руководство пользователя, Страница: 108 / 133

Output Configuration panel
The right panel consists of user configurable fields for video outputs. These include:
output resolution, refresh rate, signal format and sync polarity for the analog output, and
signal format for the digital output. The switch transition mode between inputs can be set,
and a test pattern selection is available for use in calibrating a connected display.
The Genlock/AFL settings can also be set on all models.
1
2
3
4
5
6
7
8
Figure 76. Output Configuration Panel
Resolution
Click the arrow and from the drop-down menu box (see figure 76,
1
) select the
applicable output resolution (see Resolution and refresh rates on page 18 for a full
list). The selectable resolutions include five user customizable ones: C1-C5.
Default is 720p/60 Hz.
Refresh rate
Click the arrow and from the drop-down menu box (
2
) select the applicable refresh rate.
Analog signal format
Click the arrow and from the drop-down menu box (
3
) select an applicable signal format.
Selectable formats are: RGBHV (default), RGBS, RGBcvS, (Y, R-Y,B-Y bi-level), and (Y,
R-Y,B-Y tri-level).
Analog sync polarity
Click the arrow and from the drop-down menu box (
4
) select the applicable sync polarity,
Choices are: H-/ V- (default), H+/ V-, H+/ V+, H-/ V+.
NOTE: The sync polarity option is only available when the output format is RGBHV.
76
DVS 605 • Using the Default Web Pages 100