Extron electronics DVS 605, Руководство пользователя, Страница: 107 / 133

Aspect ratio
Select Fill or Follow from the drop-down menu (see figure 75 ,
3
on the previous
page) to set the aspect ratio.
• Fill — The input signal is scaled to fill the entire video output.
•
Follow
— Follows the signal aspect ratio, with respect to the current output
resolution setting. A black letter box or pillar box bars may be applied for aspect ratio
compensation.
Auto-Image
Select the checkbox (
4
) to apply Auto-Image to the input, if desired. When selected,
then Auto-Image is applied whenever there is a change in the input sync.
Auto Memory
Select the checkbox (
5
) to enable the
Auto Memory
, if desired. Auto Memory recalls
input and image settings for signals that have previously been applied (see the table in
Auto Memory on page 24 for the Auto Memory and Auto-Image relationship).
When Auto Memory is disabled, the DVS 605 treats every newly applied input as a new
source.
HDCP Authorized
Select the HDCP Authorized checkbox (inputs 3-5) (
6
) in order to have the input report
as an HDCP Authorized device. If the box is not checked the source is blocked from
encrypting its output. This may result in some content not being passed to the output.
NOTE: The HDCP Authorized option is not available for analog inputs 1 and 2.
Film Detect
Select these checkboxes (
7
) to enable 3:2, 2:2, and 24:1 film pulldown detection for
NTSC/PAL/1080i input signals.
DVS 605 • Using the Default Web Pages 99