manualshive.com logo in svg

Extron electronics DVS 304 Series, Руководство пользователя

Поделиться
Скачать
Extron electronics DVS 304 Series Скачать руководство пользователя страница 75

4. 

If appropriate, select the Daylight Saving radio button for the region, to turn on the 
daylight saving time feature.

NOTE:

  When daylight savings time is turned on for a location, the switcher 

automatically updates its internal clock between Standard Time and Daylight 
Savings Time in the spring and fall on the date the time change occurs in the 
country or region selected. When Daylight Savings Time is turned off, the 
switcher does not adjust its time reference.

5. 

Select the Zone variable that is relevant for the location of the DVS.

NOTE:

 The 

Zone

 field identifies the standard time zone selected and displays the 

amount of time, in hours and minutes, that the local time varies from the GMT 
international time reference.

6. 

Click 

Submit

. The device is updated with the new setting.

Scaler Settings page

The 

Scaler Settings

 page simulates elements of the DVS 304 menu system, but also 

allows you to set video input signals (for inputs 2 and 4 only), define output resolutions, 
and remotely define advanced configurations.
Note that resolutions in the 

Resolution

 drop-down menu are linked to refresh rates as 

shown in the 

Resolutions and Refresh Rates

 table on page 15.

Figure 41. 

Scaler Settings Page

 

DVS 304 Series • Ethernet Control

68

Содержание DVS 304 Series

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды