manualshive.com logo in svg

Extron electronics DVS 304 Series, Руководство пользователя

Поделиться
Скачать
Extron electronics DVS 304 Series Скачать руководство пользователя страница 64

 

Figure 30. 

Sync to Matrix Switcher Window

NOTE:

• 

The matrix switcher must be connected via a configured input on the 
DVS 304 (see 

Setting up the DVS to Work with a Matrix Switcher

 on 

page 26 for information).

• 

The matrix and the DVS must to be connected to an active network at all 
times to allow the products to remain synchronized. If the connection is 
lost, the script needs to be restarted by either sending the SIS command 
or by power cycling the DVS.

 

Click 

Refresh Status

 to update the status of the matrix switcher. Refreshing the 

status returns updated information about which scaler input is tied to a particular 
matrix output.
If the sync to matrix script needs to be removed or updated, click 

Remove Sync 

Scripts

.

• 

System Settings...

 

— Select this to open a secondary window. This allows 

changes to be made to various device settings: IP and RS-232 connections, date/
time, and passwords. Select the applicable tab, change the settings as desired, and 
click 

Submit

 to make the changes effective.

NOTE:

  Changing the IP settings may result in loss of connection to the LAN.

 

DVS 304 Series • SPPCP

57

Содержание DVS 304 Series

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды