Extreme Flight 50cc Extra 300 ARF, Инструкция по эксплуатации

Страница: 14 / 39

14
linkage. Aileron servo arm length should be 1.50”. We use and
recommend the SWB double lock aluminum arms. As always, use
blue Loctite on ALL bolts!
16. Before beginning the next assembly process, take a few minutes
with your sealing iron on a medium heat setting and go over all
seams, paying special attention to thin trim stripes and the seam at
the leading edge of the wing. If there are wrinkles in the covering
on the leading edge sheeting use a heat gun with a 100% cotton t-
shirt to remove them and prevent digging into the wood with an
iron. Use caution and avoid excessive heat as you may cause the
Ultracote to shrink too much and lift at the seams. Also take the
time to seal the hinge gaps with Ultracote or Blenderm tape. Clean
the wings with Windex and put them away in their protective bag.