Extreme Flight 50cc Extra 300 ARF, Инструкция по эксплуатации

Страница: 7 / 39

7
3. Insert the 2 control horns into the base plate and trial fit the
horns into the slot and make sure they seat properly against the
base and elevator surface. You may need to remove 1/16” from the
front of the base plate to prevent it from overhanging the bevel.
Remove the horn assembly and scuff the portion of the horns that
will be inserted into the elevator with sandpaper. Apply 30 minute
epoxy to the slots and thoroughly coat the horns and base plate
bottom. Reinsert the assembly into the elevator and wipe away
any excess epoxy with a paper towel and denatured alcohol. Place
a 3mm bolt through the horns to help insure proper alignment and
set aside to dry. Repeat for the other elevator half.